Finding time in your busy schedule to set up a septic tank inspection may seem like a chore—but in the long run, it can set you up for septic success for many happy, odor-free years ahead. Here’s how.

Avoid Maintenance Emergencies

Few words strike fear into the heart of homeowners as quickly as “septic emergency.” By getting regular inspections, you can potentially avoid a major mess before it starts—and even save money on costly emergency maintenance services. Getting your septic tank regularly inspected is a whole lot cheaper than needing to have it replaced before it's time!

Enhances Septic Performance

A well-working septic tank is out of sight, out of mind, but if performance starts to slip, you’d better believe you’re going to know about it. Backed-up drains, hard-to-flush toilets, and unpleasant odors can creep into your life fast and make you, understandably, furious. Regular septic tank inspections keep your system working at its best, so you can keep it out of mind.

Increase in Home Value

Having a well-maintained septic system can increase your home’s overall value, which can put money in your pocket in the form of equity—and, if you should ever decide to move, a potentially higher sale price.

For more information about septic system inspections contact Morse Engineering and Construction.

Source: www.angi.com

Arranging for the Inspection

The property owner or operator is responsible for arranging the inspection. The buyer and seller may change the responsibility for arranging the inspection prior to title transfer, provided that this change is put in writing and that the inspection still occurs within the specified timeframes.

The purpose of the inspection is to determine if the system in its current condition can protect public health and the environment. The inspection does not guarantee that the system will continue to function adequately, or that the system will not fail at a later date. This is particularly important if you plan to increase the flow to the system.

The inspection includes determining the location and condition of cesspools, septic tanks and distribution boxes. Often, this will not require extensive excavation.

Only MassDEP-approved individuals can conduct system inspections. The New England Interstate Water Pollution Control Commission maintains lists of approved system inspectors (see below). System inspections conducted by any other individual are not valid for compliance with Title 5.

A System Inspector may not act as an agent of the Board of Health and also represent the system owner.

Reporting the Inspection Results

The System Inspector must use the MassDEP-approved inspection form, provided below. MassDEP and the local board of health will not accept reports in other formats as valid.

The inspection report must be submitted within 30 days of the inspection.

For most systems, the System Inspector is responsible for submitting the inspection report directly to the Board of Health. The buyer must also receive a copy from the seller of the property.

In some cases, inspection reports must be submitted to authorities other than the Board of Health:

• Inspection forms for State and Federal facilities must be submitted to MassDEP instead of the local Board of Health.
• Reports for large systems and shared systems must be submitted to both the local Board of Health and MassDEP.

The buyer or other person acquiring title to the property served by the system must receive a copy of the inspection report.

Inspections in connection with a property sale generally are good for 2 years. If a property is sold more than once in the 2-year period, the single inspection is valid for all property transfers.

If a system is pumped annually and the pumping records are available, an inspection is valid for 3 years.

Incomplete or Delayed Inspections

If weather conditions prevent an inspection before a sale, Title 5 allows the inspection to be done up to 6 months afterwards, provided that the seller notifies the buyer in writing of the need to complete the inspection.

For more information about septic system inspections contact Morse Engineering and Construction.

Source: mass.gov

Your septic system performs a vital job, and regular septic inspections are the best way to make sure it keeps running properly. A septic inspection from a vetted professional will ensure your system is free of leaks, blockages, and other malfunctions that could cause a smelly situation. During an inspection, a pro will also determine the fullness level of your septic tank and suggest a pumping timeline based on your usage. Here’s what you need to know about septic inspections, including what they entail and how often you need one.

Common Checks Performed During a Septic Inspection

When you call your local septic tank company for an inspection, they’ll show up with a laundry list of checks to perform. For starters, they’ll need to locate your septic tank and drain field. The location may be obvious, particularly if the system was installed more recently, but in older homes, searching for the components of your system may take some more detective work.

Once they’ve gotten the lay of the land, the septic inspectors will make several assessments. The specifics will depend on whether it’s a visual or full septic inspection. If you’re buying or selling a house, a basic visual inspection is required. However, a comprehensive septic tank inspection, or Title 5 inspection, is a more in-depth, regular part of septic tank maintenance that should be carried out every two to five years.

Visual Septic Tank Inspections

During a visual septic tank inspection, the inspector will ask several questions about the system, including when it was last inspected, how old the house is, and how often the septic tank is pumped out. Your pro will also run water in all the available sites inside your home (sinks, showers, and toilets) in order to assess the water pressure. They’ll also go outside to check the drainage field for pooling, odors, sogginess, or excessive plant growth over the top of the field—all of which can indicate a failure in the system.

Comprehensive Title V Septic Tank Inspections

During a comprehensive septic tank inspection, all components of the system are evaluated, including the septic tank, leach field, drains, pipes, and pumps that move wastewater between them. The inspector will also come inside your home to perform water tests, just like with a visual inspection.

Here are some more items commonly listed on Title V inspection forms that your pro may talk about or check:

• Existence or condition of sink garbage disposal
• Recent water meter readings (sometimes going back two years)
• Sludge depth
• Scum thickness
• Date of most recent pumping
• Liquid level in distribution box
• Alarms
• Slope of land at installation site

The Leach Field

The septic inspector will look at your yard for common leach field problems like standing water, puddles, and other signs that could indicate it’s not working properly. The inspector may also introduce a special dye to your water system that will visually mark its journey through the system (and, ideally, evenly out into your leach field). However, this may not happen until they come into your home—more on that in just a moment.

The Septic Tank

The inspector will also remove the cover of your septic tank to check the water level inside since too much water could indicate a drainage problem. (Septic tanks should always have some water in them, but it should be 8 to 12 inches below the tank’s surface.)

The inspector may use a tool known as a “sludge judge,” which is essentially a hollowed-out tube, to determine how much sludge and scum are present in the tank. This can help them figure out how soon you’ll need to call a septic pro for pumping. If your tank does need to be pumped as part of the inspection, the inspector will use a flashlight to check the tank for leaks that could cause harmful wastewater to leach out into the surrounding environment.

Other Components

During a septic inspection, the pro will also look at the components of the system that connect the septic tank to the leach field—namely, the distribution box, which helps ensure wastewater is evenly distributed across the drain field. The pipes that connect the septic tank to the distribution box and those that connect the distribution box to the leach field are also subject to inspection.

Again, the inspector will step inside to try out your water sources and ensure there’s proper pressure and drainage. If they do choose to use a dye, they’ll introduce it to the system from inside your home, flushing it through a drain. The dye will be green. If, after a while, your yard looks like the Chicago River on St. Paddy’s Day, it means your system has failed inspection. A complete dye inspection takes between two and four hours on average.

For more information about septic system inspections contact Morse Engineering and Construction.

angi.com

You should get an in-depth septic inspection once every two to five years. Fortunately, that’s how often septic tanks need to be pumped, anyway, which means you can get both done at the same time.

A well-maintained and regularly pumped septic system can last as long as 20 to 30 years. Although they may seem daunting, regular septic inspections are the key to keeping your system in proper, working order for as long as possible. Your pro will do everything they can to ensure a pain-free inspection process that doesn't interfere with your daily activities too much.

How Much Does a Septic Inspection Cost?

Full septic tank inspections cost $550 on average, so add this regular expense to your budget. Although it may seem pricey, it’s an investment that can help you avoid repairs, which can be far more damaging to your budget. The average cost to repair a septic tank is over $1,800.

Visual septic inspections may be done as part of the overall home inspection process during the purchase or sale of a home, and the cost should be built into the overall inspection quote.

For more information about septic system inspections contact Morse Engineering and Construction.

Source: angi.com