Morse Engineering and Construction Industries

Mound Septic Systems

- Thursday, July 25, 2024

Morse Engineering and Construction - Mound Septic System

Design and Components

Mound systems are specifically designed for areas with shallow soil depth, high groundwater levels, or shallow bedrock. These systems consist of a sand mound that is constructed above the natural ground surface. The sand mound provides additional treatment and absorption of wastewater.

How they work

Mound systems work similarly to conventional septic systems, with wastewater flowing from the home into a septic tank. From the tank, the effluent is then pumped to the sand mound, where it is distributed over a large area. The effluent then filters through the sand, providing additional treatment before it reaches the underlying soil or groundwater.

Pros and cons

One of the significant advantages of mound systems is their ability to overcome site limitations, such as shallow soil or high water table. They can provide reliable treatment and absorption in areas where conventional systems may not be feasible. However, mound systems may be more expensive to install and maintain compared to conventional systems.

Cost to purchase and maintain

The cost of purchasing and installing a mound system will vary depending on factors such as mound size, soil conditions, and labor costs. The cost is more expensive than more traditional systems. Maintenance costs may also be higher due to the additional monitoring and potential replacement of components.

For more information, contact Morse Engineering and Construction for more information.

Source: aboutseptictanks.com

Aerobic Treatment Septic Systems

- Thursday, July 18, 2024

Design and Components

Aerobic treatment units (ATUs) are designed to increase the bacterial activity in the treatment tank by injecting oxygen. They consist of multiple chambers, including a pretreatment chamber, an aeration chamber, and a clarification chamber. These chambers work together to provide enhanced treatment and reduce the amount of solids in the effluent.

How they work

ATUs work by introducing oxygen into the treatment tank, which promotes the growth of aerobic bacteria. These bacteria break down organic matter more efficiently than the anaerobic bacteria found in conventional septic systems. The treated effluent is then discharged to a drainfield or a disinfection unit before being released into the environment.

Pros and cons

One of the significant advantages of ATUs is their ability to provide superior treatment compared to conventional systems. They can reduce the levels of nitrogen and phosphorus in the effluent, making them suitable for sites with strict water quality requirements or sensitive ecosystems. However, they may have higher energy consumption and maintenance requirements compared to conventional systems.

Cost to purchase and maintain

The cost of purchasing and installing an ATU will vary depending on factors such as system size, technology, and labor costs, but is more expensive than other systems. Maintenance costs may also be higher due to the need for regular inspection, monitoring, and potential replacement of components.

For more information, contact Morse Engineering and Construction Industries, LLC for more information.

Source: aboutseptictanks.com

Drip Distribution Septic Systems

- Monday, July 15, 2024

Design and Components

Drip distribution systems are designed to disperse effluent into the top few inches of soil using drip laterals. These systems utilize a network of small pipes with evenly spaced emitters that deliver wastewater directly to the soil, promoting even distribution and treatment.

How they work

Drip distribution systems work by transporting effluent from the septic tank to a distribution box. From the distribution box, the effluent is then delivered to the drip laterals, which distribute the wastewater evenly throughout the designated area. The effluent is applied at a slow and controlled rate, allowing for better treatment and absorption by the soil.

Pros and cons

Drip distribution systems offer several advantages, including efficient and uniform distribution of effluent, reduced risk of system failure due to clogging, and the ability to handle high wastewater flows. However, they may have higher installation costs compared to conventional systems and may require more specialized maintenance.

Cost to purchase and maintain

The cost of purchasing and installing a drip distribution system can vary depending on factors such as the size of the system, the number of drip laterals, soil conditions, and labor costs. Maintenance costs may be higher compared to conventional systems, as the drip laterals may need periodic flushing or replacement.

For more information, contact Morse Engineering and Construction for more information.

Source: aboutseptictanks.com

Chamber Septic Systems

- Thursday, July 11, 2024

Design and Components

Chamber systems are an alternative to traditional gravel or stone drainfields. Instead of using traditional gravel, chamber systems utilize interconnected chambers that are filled with soil. These chambers provide a larger surface area for wastewater to infiltrate the soil and promote better treatment.

How they work

Chamber systems work similarly to conventional septic systems, with wastewater flowing from the home into a septic tank. From the tank, the wastewater is then distributed to the chamber system. The chambers provide additional contact between the effluent and the soil, allowing for better treatment and absorption.

Pros and cons

One of the major advantages of chamber systems is their ease of installation. They require fewer materials and less excavation compared to traditional drainfields. They are also more resistant to clogging, as the chambers have self-cleaning features. However, chamber systems may be more expensive to purchase and maintain than conventional systems.

Cost to purchase and maintain

The cost of purchasing and installing a chamber system will vary depending on factors such as chamber size, soil conditions, and labor costs. Maintenance costs are similar to conventional systems, with regular septic tank pumping recommended every 3-5 years.

For more information, contact Morse Engineering and Construction.

Source: aboutseptictanks.com

CALL TODAY (888) 380-5298